AdjustField
Adjust the value of a field.
Description
AdjustField( fieldno, Float:value )
Adds the given value to the field value.
This command performs the addition with double (64-bit) math. It may be useful for accumulating values that can grow very large, in which case this command can be used to maintain precision.
Parameters
fieldno | Which field to adjust |
value | Value to add |
Return value
The float value of the field after being adjusted.
Example usage
AdjustField(4, 0.1); // adds 0.1 to the value of field 4
NOTE: First appeared in firmware 20091601