ezeio2:drivers:doc:tz_temp_rh1030

Description

This driver is designed for use with the temperature and humidity sensor sold by eze System (P/N TA1030).


Settings (Center panel )

Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor and/or application. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)

Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.

Notes - This space can be used to store information specific to the device, such as: location, wiring, scaling, etc.

Doc link - This links you to relevant documents such as the manufactures user manual.

Modbus Address - Enter the RTU device number (must be unique on the bus)


Device status & Registers (Right panel)

Driver info - Typically this is the name from the program file

Driver updated/version - Date loaded or updated and the version of the driver

Battery & Signal - Signal indicates the progress through the script. If driver fails to operate, signal number indicates progress

Driver status - Color and text of status bubbles give a quick visual reference of Communication, Operation, and Application

Communication - Com count indicates number of successful and unsuccessful data packets received


Available registers

  1. Relative Humidity %
  2. Temperature C
  3. Dew point C
  4. Temperature F
  5. Dew point F
  • ezeio2/drivers/doc/tz_temp_rh1030.txt
  • Last modified: 2024-05-10 19:06
  • by johpar