This driver creates a runtime clock from a Field value. The runtime is then used to send service reminder messages, based on a user defined service interval. When scheduled service is completed, a reference number is entered to reset the service interval counter to zero.

Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the asset or site. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)

Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.

Notes - This space can be used to store information specific to the device/asset, such as: location, wiring, scaling, etc.

Below the note field, you will see the eze System description, notes and instructions.

Run status field - A drop-down menu provides the means of selecting a specific Field on an ezeio to be used to indicate “Running”. The Field must be zero, if not running. Negative values and decimals are evaluated as running. If the source for the “Run status” does not produce a stable zero when the asset is not running, consider a means of filtering the input, such as using the logical state provided by the "Discrete input" driver.

Service interval - Enter the number of hours desired between servicing

Destination list for reminders - Use the drop-down menu to select one of the accounts "Destination lists". The predefined list of recipients will receive the service reminders. The reminders are sent at 60%, 80% and 100% of the service interval. When over 100% of service interval reminders are sent every 5%.

Reminder message - A default message is provided with minimal text and tags to provide the service interval statistics at each stage of the interval

Destination list for service reset - Use the drop-down menu to select one of the accounts “Destination lists”. The predefined list of recipients will receive the service reset notification.

Reset message - A default message is provided with minimal text and tags to provide the service ID and runtime data. The service ID is written to the Field mapped to register 8 of the driver. Any value can be written, intention is to provide a means of tracking or verification. Examples of possible service ID's are; technicians ID # or work order #. Upon a submitting the “New value” the “Service reset” message will be sent.