This driver is designed for use with WattNode Modbus Module (WND) WattNode Modbus (WNC) and Multi-Circuit meter (MCM).

Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor and/or application. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)

Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.

Notes - This space can be used to store information specific to the device, such as: location, wiring, scaling, etc.

Address - Enter the RTU device number (must be unique on the bus) or the last octet of the IP address, if connected via Ethernet/TCP

Module - Default setting is RTU for WattNode WND & WNC models. For Multi-Circuit Meter (MCM) select the corresponding Unit (circuit) number.

CT (A, B, & C) - Drop-down menus are provided for selecting CT ratings for each of the three phases metered.

Driver info -

Driver updated/version -

Battery & Signal -

Driver status -

Communication -

1. Total Energy (kWh)
2. Total Power (kW)
3. Power phase A (kW)
4. Power phase B (kW)
5. Power phase C (kW)
6. Volt average ph-N (V)
7. Volt phase A-N (V)
8. Volt phase B-N (V)
9. Volt phase C-N (V)
10. Current phase A (A)
11. Current phase B (A)
12. Current phase C (A)
13. Power factor average
14. Power factor phase A
15. Power factor phase B
16. Power factor phase C
17. Volt average L-L (V)
18. Volt phase A-B (V)
19. Volt phase B-C (V)
20. Volt phase C-A (V)
21. Total Energy NR (kWh) - Not resettable
22. Positive Energy NR (kWh) - Not resettable
23. Negative Energy NR (kWh) - Not resettable
24. Energy phase A (kWh)
25. Energy phase B (kWh)
26. Energy phase C (kWh)
27. Total Reactive Energy (kVAR h)
28. Reactive Energy phase A (kVAR h)
29. Reactive Energy phase B (kVAR h)
30. Reactive Energy phase C (kVAR h)
31. Reactive Power total (kVAR)
32. Reactive Power phase A (kVAR)
33. Reactive Power phase B (kVAR)
34. Reactive Power phase C (kVAR)
35. Total Apparent Energy (kVA h)
36. Apparent Energy phase A (kVA h)
37. Apparent Energy phase B (kVA h)
38. Apparent Energy phase C (kVA h)
39. Total Apparent Power (kVA)
40. Apparent Power phase A (kVA)
41. Apparent Power phase B (kVA)
42. Apparent Power phase C (kVA)
43. Reset Energy
44. Frequency (Hz)