Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor and/or application. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)

Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.

User Notes - This space can be used to store information specific to the device and your application, such as: location, wiring, scaling, etc.

eze System Notes - In this space we provide: wiring instructions, product image, product details.

SDI-12 address - Enter the unique SDI-12 address (device ID) of the sensor.

Heater ON below (C) - Enter the temperature below which the sensor's heater will turn on.

Dewpoint (C) field number - Use the drop-down menu to select the Dewpoint Field used by the sensor.

Driver info - Typically this is the name from the program file

Driver updated/version - Date loaded or updated and the version of the driver

Battery & Signal - Signal indicates the progress through the script. If driver fails to operate, signal number indicates progress

Driver status - Color and text of status bubbles give a quick visual reference of Communication, Operation, and Application

Communication - Com count indicates number of successful and unsuccessful data packets received

1. Solar Radiation - Radiation value in Watts per square meter.
2. Raw millivolt - Raw electrical output signal in millivolts.
3. Sensor temperature - Temperature reading (in Celsius) provided by the sensor
4. Heater - State of heater (on/off)
5. X-axis value - Onboard level sensor measurement
6. Y-axis value - Onboard level sensor measurement
7. Z-axis value - Onboard level sensor measurement
8. Dewpoint (external) - External sensor reading used by sensor (selected in driver config)