ezeio2:mange:systems

Systems

Located on the “Manage” level of the eze.io user interface, the Systems tab is where the ezeio controllers reside within a group. From this tab you can add or remove controllers, view their status, graph historical data and access event logs.

This table lists the controllers assigned to the group with columns for serial number, name, notes, status, and the button linking to the configuration screen for each ezeio.

The information in the first three columns can be added to alarm messages by use of message template tags. Serial Number = [EZEID], Name = [EZENAME], User Note = [EZENOTE]

  • Serial Number - This number is assigned by the manufacture and cannot be changed.
  • ezeio Name - This name is user defined and edited through the ezeio's System settings under, the System tab in each controllers configuration.
  • User note - This text is user defined and edited through the ezeio's System settings, under the System tab in each controllers configuration. This provides the opportunity to deliver additional information about the system, sensors or asset the ezeio is connected to. This information can also be sent as part of an alarm message using the Message Template Tag [EZENOTE].
  • ezeio Status - Icons in this column indicate status of the connection, location, and synchronization with the server.

The lower half of the Systems page is where you can view, graph and download the data made available from a selected ezeio's Fields. The map tab shows the location of all controller in the group.

Status Tab

Clicking on the status tab (if not already shown by default) will reveal a table of exposed Fields. Columns from left to right are; 10 minute log graphing check box, Fast log graphing check box, Field name, View, Value, and unit.

  • 10 minute log graphing check box - All Fields are logged at 10 minute intervals by default. Check the box next to desired data point to include in graph.
  • Fast log graphing check box - If configured for fast logging, the check box will be outlined in black. Check the box next to desired data point to include in graph.
  • Name - Driver or user defined name of Field.
  • View - Is a alternative way of displaying a Field value.
  • Value - This number can represent many things including a measurement, status, set point.
  • Unit - Driver or user defined unit of measure.

Graph Tab

Event Log Tab

Map Tab

  • ezeio2/mange/systems.txt
  • Last modified: 2021-01-20 17:47
  • by johpar