ezeio2:driverdetail [ezeio documentation]

Manufacturer: EP Solar Technology Co.Ltd.
Product: EPEVER Tracer
Model: Tracer-AN
Class: MODBUS
Updated: 2023-11-13

[ CLICK HERE FOR MORE INFORMATION ]

Registers

#	Name	Unit
1	PV array rated voltage	V
2	PV array rated current	A
3	PV array rated power	W
4	Battery rated voltage	V
5	Battery rated charge current	A
6	Battery rated charge power	W
7	Output rated current	A
8	PV array voltage	V
9	PV array current	A
10	PV array power	W
11	Battery voltage	V
12	Battery current	A
13	Battery power	W
14	Load voltage	V
15	Load current	A
16	Load power	W
17	Battery temperature	°C
18	Case internal temperature	°C
19	Heatsink temperature	°C
20	Battery State Of Charge	%
21	Remote battery temperature	°C
22	Battery rated voltage	V
23	Battery status (V)
24	Battery status (T)
25	Battery status
26	Input volt status
27	Charging status
28	Equipment status
29	PV max volt today	V
30	PV min volt today	V
31	Battery max volt today	V
32	Battery min volt today	V
33	Energy used today	kWh
34	Energy used this month	kWh
35	Energy used this year	kWh
36	Energy used total	kWh
37	Energy generated today	kWh
38	Energy generated this month	kWh
39	Energy generated this year	kWh
40	Energy generated total	kWh
41	CO2 reduction	ton
42	Battery net current	A
43	Battery temperature	°C
44	Ambient temperature	°C

Notes

MPPT Solar Charge Controller

Modbus/RTU connections:
PINOUT using EIA586B cable is 

1:  n/c
2:  n/c
3:  RS485 A Green/White
4:  RS485 A    Blue
5:  RS485 B Blue/White
6:  RS485 B   Green
7:  GND     Brown/White
8:  GND       Brown

EPEVER RS485 B = ezeio D0
EPEVER RS485 A = ezeio D1
EPEVER GND = ezeio 0V

Default is 115200/N81, address 1

Epever Tracer MPPT controller

Registers

Notes