ezeio2:driverdetail

CATTRON CP750E/CP1000 REGEN

Manufacturer: Cattron
Product: CANplus
Model: CP750-E/CP1000
Class: MODBUS
Updated: 2026-01-29

[ CLICK HERE FOR MORE INFORMATION ]

Registers

#NameUnitDescription
1Forced Regen Active.
2Regen Active Status.
3Engine running0/1
4Exhaust Gas Temp°C
5SCR Tank Temp°C
6Force Regen Active
7Regen needed
8Time since exhaust cleaneds
9DPF Lamp command
10DPF Filter status
11Inhibit status
12Inhibity due to switch
13Passive Regen Status.
14Inhibit due to Clutch.
15Inhibit due to Svr Brake.
16Inhibit due to PTO.
17Inhibit due to Pedal off Idle.
18Inhibit due to Neutral.
19Inhibit due to Vehicle speed.
20Inhibit due to Parking break.
21Inhibit due to Exhaust gas temp.
22Inhibit due to System fault.
23Inhibit due to System timeout.
24Inhibit due to Temp lockout.
25Inhibit due to Permanent lockout.
26Inhibit due to Not warmed up.
27Inhibit due to Low speed.
28Active Regen Initiation Config.
29Hydrocarbon Doser Purging Enabled.
30Inhibit due to Low exhaust gas speed.
31Conditions not met for active regen.
32SCR Inducment Severity

Notes


                    

                


                


                                        
                        
  •  ezeio2/driverdetail.txt
  •  Last modified: 2024-05-07 23:25
  • by andreh