Fan Master/Slave Control
Manufacturer: eze System
Product: Supervisor driver
Model:
Class: MODBUS
Updated: 2024-12-18
Registers
| # | Name | Unit | Description |
|---|---|---|---|
| 1 | Fan speed control | . | |
| 2 | Red light status | ||
| 3 | Door open pulse | ||
| 4 | Door close pulse | ||
| 5 | Master 1 fan speed | . | |
| 6 | Master 2 fan speed | . | |
| 7 | Master 3 fan speed | . |
Notes
Intended to run with the Implenia Tunnel Fan Control driver. If configured as a master (leave the three master addresses zero or blank), the driver controls the outputs and fan directly. If configured as a slave (one or more master addresses set - use the last octet of the IP address of the master ezeio), the driver will control the fan speed based on the master setting.