Omega SP-016 Heat Flux Probe
Manufacturer: Omega
Product: SP-016
Model:
Class: MODBUS
Updated: 2024-06-27
[ CLICK HERE FOR MORE INFORMATION ]
Omega SP-016 Heat Flux Sensor
Description
This driver is design to allow communication with the Omega SP-016 via the Omega IF-002 Modbus converter.
Settings (center panel)
Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor and/or application. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)
Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.
User Notes - This space can be used to store information specific to the device and your application, such as: location, wiring, scaling, etc.
eze System Notes - In this space we provide: wiring instructions, product image, product details.
Modbus address - Enter Device I.D. (Modbus address). This address must be unique on the bus.
Registers
| # | Name | Unit | Description |
|---|---|---|---|
| 1 | Heat Flux | W/m2 | Directional flow of heat energy, expressed as Watts per square meter |
| 2 | Temperature | °C | Temperature of sensor, expressed as degrees Celsius |
| 3 | Sensitivity 0xf040 | ||
| 4 | Offset 0xf060 | ||
| 5 | Gain 0xf062 | ||
| 6 | Sensitivity 0xf460 | ||
| 7 | Gain 0xf468 | ||
| 8 | Offset 0xf470 |
Notes
Heat Flux Probe. Connects to Modbus/RTU via Omega Smart Interface IF-001 [https://ezeio.s3.us-west-2.amazonaws.com/dvc/Omega/OmegaSP016.jpg] Connect: IF-001 pin 1 (VDD) -> ezeio +V IF-001 pin 2 (A) -> ezeio D1 IF-001 pin 3 (GND) -> ezeio 0V/gnd IF-001 pin 4 (B) -> ezeio D0