Siemens SENTRON POC1000
Manufacturer: Siemens
Product: SENTRON 7KN1110 POC1000
Model: 7KN1110 POC1000
Class: MODBUS
Updated: 2024-03-11
[ CLICK HERE FOR MORE INFORMATION ]
Registers
| # | Name | Unit | Description |
|---|---|---|---|
| 1 | Device 1 status | . | |
| 2 | Device 2 status | . | |
| 3 | Device 3 status | . | |
| 4 | Device 4 status | . | |
| 5 | Device 5 status | . | |
| 6 | Device 6 status | . | |
| 7 | Device 7 status | . | |
| 8 | Device 8 status | . | |
| 9 | Device 9 status | . | |
| 10 | Device 10 status | . | |
| 11 | Device 11 status | . | |
| 12 | Device 12 status | . | |
| 13 | Device 13 status | . | |
| 14 | Device 14 status | . | |
| 15 | Device 15 status | . | |
| 16 | Device 16 status | . | |
| 17 | Device 17 status | . | |
| 18 | Device 18 status | . | |
| 19 | Device 19 status | . | |
| 20 | Device 20 status | . | |
| 21 | Device 21 status | . | |
| 22 | Device 22 status | . | |
| 23 | Device 23 status | . | |
| 24 | Device 24 status | . | |
| 25 | Offline | count | |
| 26 | Device 1 pairing status | . | |
| 27 | Device 2 pairing status | . | |
| 28 | Device 3 pairing status | . | |
| 29 | Device 4 pairing status | . | |
| 30 | Device 5 pairing status | . | |
| 31 | Device 6 pairing status | . | |
| 32 | Device 7 pairing status | . | |
| 33 | Device 8 pairing status | . | |
| 34 | Device 9 pairing status | . | |
| 35 | Device 10 pairing status | . | |
| 36 | Device 11 pairing status | . | |
| 37 | Device 12 pairing status | . | |
| 38 | Device 13 pairing status | . | |
| 39 | Device 14 pairing status | . | |
| 40 | Device 15 pairing status | . | |
| 41 | Device 16 pairing status | . | |
| 42 | Device 17 pairing status | . | |
| 43 | Device 18 pairing status | . | |
| 44 | Device 19 pairing status | . | |
| 45 | Device 20 pairing status | . | |
| 46 | Device 21 pairing status | . | |
| 47 | Device 22 pairing status | . | |
| 48 | Device 23 pairing status | . | |
| 49 | Device 24 pairing status | . | |
| 50 | Paired | count |
Notes
SENTRON wireless circuit protection monitoring receiver. This device connects via Modbus/TCP to the ezeio. It receives statuses from up to 24 SENTRON peripherals. Setup of the SENTRON system needs to be done using the Siemens provided software. Please refer to the Siemens documentation for the process. Once set up, peripheral drivers can be added to the ezeio system. Note: This driver requires the ezeio firmware 22121501 or newer.