Notes

Driver manages a pulse-operated latch, such as the Southco R4-EM or similar.

Inputs needed (any ezeio input can be used):
Door status (magnet switch). Closed circuit = Door closed.

Latch status (NC from latch). Closed circuit = Latch closed.

Output (any ezeio output can be used):
Triggers the latch with a 100ms pulse.

Note that the output pulse voltage is the same as the system supply voltage. 

The Latch should be supplied directly from the power supply.
DO NOT supply the latch through the ezeio.

If no destination list is selected, alerts are just logged.

See documentation for more details: