Shimaden SR91
Manufacturer: Shimaden
Product: Temperature controller
Model: SR91
Class: MODBUS
Updated: 2023-11-13
[ CLICK HERE FOR MORE INFORMATION ]
Registers
| # | Name | Unit | Description |
|---|---|---|---|
| 1 | PV value | ||
| 2 | Execution SV value | ||
| 3 | Control output 1 | % | |
| 4 | Control output 2 | % | |
| 5 | Operation flags | ||
| 6 | Event 1 output flag | ||
| 7 | Event 2 output flag | ||
| 8 | HB current value | A | |
| 9 | HL current value | A | |
| 10 | Control Write Command | ||
| 11 | Target set value | ||
| 12 | Control out 1 propotional band | ||
| 13 | Control out 1 integral time | ||
| 14 | Control out 1 derivative time | ||
| 15 | Manual reset 1 | ||
| 16 | Hysteresis 1 | ||
| 17 | Control out 1 lower output lim | ||
| 18 | Control out 1 higher output lim | ||
| 19 | Control out 1 target value fn | ||
| 20 | Control out 2 propotional band | ||
| 21 | Control out 2 integral time | ||
| 22 | Control out 2 derivative time | ||
| 23 | Dead band 2 | ||
| 24 | Hysteresis 2 | ||
| 25 | Control out 2 lower output lim | ||
| 26 | Control out 2 higher output lim | ||
| 27 | Control out 2 target value fn | ||
| 28 | Event 1 mode | ||
| 29 | Event 1 set value | ||
| 30 | Event 1 hysteresis | ||
| 31 | Event 1 standby actions | ||
| 32 | Event 2 mode | ||
| 33 | Event 2 set value | ||
| 34 | Event 2 hysteresis | ||
| 35 | Event 2 standby actions |
Notes
Shimaden 91 series Temperature/Humidity controller Bus connection: SH RS485 - (12) -> ezieo D0 SH RS485+ (11) -> ezeio D1 SH SG (1) -> ezeio 0V