ezeio2:configuration:messagetemplates

The following tags are available in message templates:

Tag Purpose Example
[MESSAGEID] A unique message id ABC123-2-14-7474
[ZULUTIME] Zulu/UTC time when message was triggered 2019-12-31T23:59:52Z
[ISODATE] Date when message was triggered, in controller time zone, ISO format 2019-12-31
[USDATE] Date when message was triggered, in controller time zone, US format 12/31/19
[ISOTIME] Time when message was triggered, in controller time zone, ISO format 23:59:59
[USTIME] Time when message was triggered, in controller time zone, US format 11:59:59 PM
[WEEKDAY] Weekday when message was triggered, in controller time zone Mon .. Sun
[MONTH] Month when message was triggered, in controller time zone Jan .. Dec
[DAY] Day when message was triggered, in controller time zone 31
[EZEID] ezeio serial number ABC-987
[EZENAME] ezeio name From Configure→System→Name
[EZENOTE] ezeio note From Configure→System→Note
[TYPE] Message type ALARM, REALARM, RESTORE, INFO
[SOURCE] Message source SEND, LOG, SCRIPT
[GROUPNAME] Name of the group where the ezeio is assigned From Group Settings→Group Name
[SOURCENAME] Name of the source alarm From Configure→Alarms→Name
[ACTIONNAME] Name of the action source action From Configure→Alarms→Alarm action→Name
[GPS] GPS coordinates (if available) Lat:38.671447, Lng-121.152385:, Ele:105.2
[GPSLINK] GPS coordinates Google maps link https://maps.google.com/maps?q=
[GPSSIGNAL] Signal quality of the GPS receiver 14
[RSSI] Cellular signal RSSI 0 (no signal) .. 31 (full signal)
[P#] Message (#=1-4) parameters (see script command “Event”)
[FV#] Field value, #=1-90 318.2
[FU#] Field unit, #=1-90 psi
[FN#] Field name, #=1-90 Pressure
[F#] Field status, #=1-90, as “Field name: Value Unit”, same as [FN#]: [FV#] [FU#] Pressure: 318.2 psi
<AssetTag> Can be used in place of the Field #, Example: [FV<outsidetemp>]
[TEXT] Event text (see script command “Event”)
[ACTIONMESSAGE] The message/template from the action (typically used in the destination list)
[RECIPIENT] The name of the destination (recipient) for this message (from Destination→Name)
[DESTINATION] The address of the destination (from Destination→Address)
[DESTINATIONTOKEN] The token of the destination (from Destination→Token)
[DVC#COMMSTAT] Device communication status, #=1-40 n/a, ERROR, WARNING, WARNING2, WARNING3, OK, OK2, OK3
[DVC#OPSTAT] Device operational status, #=1-40 n/a, ERROR, WARNING, OK
[DVC#APPSTAT] Device application status, #=1-40 n/a, ERROR, WARNING, OK, OK2, OK3, OK4, OK5
[DVC#STATUS] Device overall status, #=1-40 OK or if there's an issue COMM:ERROR
[DVCSTATUS] List all devices overall status #1 Pressure sensor: OK
#2 Energy meter: OP WARNING
#3 Geiger counter: APP ERROR
[DVCWARNINGS] List all device warnings and errors (if any) #2 Energy meter: OP WARNING
#3 Geiger counter: APP ERROR
[DVCERRORS] List all device errors (if any) #3 Geiger counter: APP ERROR
  • ezeio2/configuration/messagetemplates.txt
  • Last modified: 2020-08-17 23:27
  • by andreh