==== WattNode Advanced driver ====

=== Description ===

This driver is designed for use with WattNode Modbus Module (WND) WattNode Modbus (WNC) and Multi-Circuit meter (MCM). 

 ----

=== Settings ===

**Name** - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor and/or application. Keep the name short as it will be combined with the register name to create the default "Field" name (if added to "Fields")

**Active Check box** - Check this box and "Save changes" to run the driver. The driver program can be suspended by unchecking the box and clicking on "Save changes".

**Notes** - This space can be used to store information specific to the device, such as: location, wiring, scaling, etc.

 ----

=== Meter settings ===

**Address** - Enter the RTU device number (must be unique on the bus) or the last octet of the IP address, if connected via Ethernet/TCP 

**Module** - Default setting is RTU for WattNode WND & WNC models. For Multi-Circuit Meter (MCM) select the corresponding Unit (circuit) number. 
 
**CT (A, B, & C)** - Drop-down menus are provided for selecting CT ratings for each of the three phases metered.

 ----

=== Device status ===



**Driver info** - 

**Driver updated/version** - 

**Battery & Signal** - 

**Driver status** - 

**Communication** - 

 ----

=== Available registers ===

    - Total Energy (kWh)
  - Total Power (kW)
  - Power phase A (kW)
  - Power phase B (kW)
  - Power phase C (kW)
  - Volt average ph-N (V)
  - Volt phase A-N (V)
  - Volt phase B-N (V)
  - Volt phase C-N (V)
  - Current phase A (A)
  - Current phase B (A)
  - Current phase C (A)
  - Power factor average
  - Power factor phase A
  - Power factor phase B
  - Power factor phase C
  - Volt average L-L (V)
  - Volt phase A-B (V)
  - Volt phase B-C (V)
  - Volt phase C-A (V)
  - Total Energy NR (kWh) - Not resettable
  - Positive Energy NR (kWh) - Not resettable
  - Negative Energy NR (kWh) - Not resettable
  - Energy phase A (kWh)
  - Energy phase B (kWh)
  - Energy phase C (kWh)
  - Total Reactive Energy (kVAR h)
  - Reactive Energy phase A (kVAR h)
  - Reactive Energy phase B (kVAR h)
  - Reactive Energy phase C (kVAR h)
  - Reactive Power total (kVAR)
  - Reactive Power phase A (kVAR)
  - Reactive Power phase B (kVAR)
  - Reactive Power phase C (kVAR)
  - Total Apparent Energy (kVA h)
  - Apparent Energy phase A (kVA h)
  - Apparent Energy phase B (kVA h)
  - Apparent Energy phase C (kVA h)
  - Total Apparent Power (kVA)
  - Apparent Power phase A (kVA) 
  - Apparent Power phase B (kVA) 
  - Apparent Power phase C (kVA)
  - Reset Energy
  - Frequency (Hz)