https://doc.eze.io/ 2026-05-24T19:30:56+00:00 https://doc.eze.io/ https://doc.eze.io/_media/logo.png text/html 2021-09-24T22:06:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/can?rev=1632521201&do=diff CAN The ezeio supports the CAN hardware standard. Currently, the CAN port is only used to interface with ezeio proprietary hardware. text/html 2024-05-08T19:29:51+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/inputs?rev=1715196591&do=diff Inputs There are eight (8) inputs on the ezeio hardware. More inputs can be added using the ezeio expansion modules <https://ezesys.com/ezeio-mkii-i/o-expander>. Other types of inputs can be added using third party devices connected via Modbus, CAN or SDI-12. The ezeio and ezeio I/O Expander inputs are compatible with a wide variety of sensors, either directly or through the use of an amplifier or transmitter. These common, industry standard, sensor outputs are directly supported. text/html 2021-09-24T22:05:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/modbusrtu?rev=1632521154&do=diff Modbus/RTU The Modbus Port Setup driver is required to activate the Modbus port and configure bus setting Modbus/RTU is a very common protocol for control and monitoring applications. It is supported by a wide range of device types from almost all manufacturers of control electronics. Modbus/RTU is popular because it is very reliable and simple to use and implement. text/html 2023-06-08T20:44:20+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/modbustcp?rev=1686257060&do=diff Modbus/TCP Modbus/TCP is a common protocol for connecting control and monitoring equipment. The fundamental protocol is the same as for Modbus/RTU, with the obvious difference that Modbus/TCP uses an Ethernet connection to link the devices together, while Modbus/RTU use a serial, RS-485 bus. text/html 2025-06-11T19:30:21+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/outputs?rev=1749670221&do=diff Outputs The ezeio has four (4) outputs built in. Additional outputs can be added using ezeio expansion devices, or third party devices connected via Modbus, CAN or SDI-12. ezeio MkII I/O expander - <https://ezesys.com/ezeio-mkii-i/o-expander> The function of each output is completely controlled by software. The function can be programmed/automatic, manual or a combination of manual and automatic. Common use for outputs are to control a heating or cooling system based on the input from a tempe… text/html 2021-09-24T22:06:16+00:00 Anonymous (anonymous@undisclosed.example.com) https://doc.eze.io/ezeio2/connections/sdi12?rev=1632521176&do=diff SDI-12 SDI-12 is a communications protocol for intelligent sensors that typically are used to monitor environment data. Devices and sensors are available from multiple manufacturers. For detailed information about SDI-12, please refer to <http://www.sdi-12.org/> The bus is multidrop, meaning multiple devices can be connected to the same data wire, and because each device is configured with a unique address, the ezeio can individually read data from each device.