Differences

This shows you the differences between two versions of the page.

--- ezeio2:userinterface:configuration:devices:driverlist:ezesysinfo [2021-12-15 01:42] – [Registers] johpar
+++ ezeio2:userinterface:configuration:devices:driverlist:ezesysinfo [2023-10-13 17:15] – johpar
@@ Line 4: / Line 4: @@
 ==== Description ====
-The ezeio MkII System Info driver provides system performance data as well as configuration settings for two of the ezeio's serial buses. In addition to the data and settings, registers 19 and 20 provide a means of locking in a location and measuring the units distance from that point, if it moves (requires a GPS receiver). This driver is loaded by default on units with serial numbers BBA and higher.
+The ezeio MkII System Info driver provides system performance data as well as configuration settings for two of the ezeio's serial buses. In addition to the data and settings, registers 17 and 20 provide a means of locking in a location and measuring the units distance from that point, if it moves (requires a GPS receiver). This driver is loaded by default on units with serial numbers BBA and higher.
-==== Configuration settings ====
+==== Configuration settings (center panel) ====
 **Modbus data rate (BAUD rate)** - The speed of the bus can be set or changed to align with the devices connected to the Modbus RTU port. The drop-down menu list all seven speeds defined by the Modbus.org specifications (1200 to 115200 bps).
@@ Line 16: / Line 16: @@
 {{ezeio2:userinterface:configuration:devices:ezesysinfo:configuring.png?direct&400|}}
-==== Registers ====
+----
+==== Status & Registers (right panel) ====
+=== Device Status ===
+**Driver info** - Typically this is the name from the program file
+**Driver updated/version** - Date loaded or updated and the version of the driver
+**Battery & Signal** - Signal indicates the progress through the script. If driver fails to operate, signal number indicates progress
+**Driver status** - Color and text of status bubbles give a quick visual reference of Communication, Operation, and Application
+**Communication** - Com count indicates number of successful and unsuccessful data packets received
+----
+=== Available registers ===
 Twenty registers offer a mix of performance date, statuses, GPS data, and a feature that locks in a GPS reference location. A description of each register is given below.
@@ Line 67: / Line 86: @@
 ----
-**GPS signal (DOP value)**
+=== GPS signal (DOP value) ===
 | DOP Value | Rating[5] | Description |
 | <1 | Ideal | Highest possible confidence level to be used for applications demanding the highest possible precision at all times. |
@@ Line 74: / Line 93: @@
 | 5-10| Moderate | Positional measurements could be used for calculations, but the fix quality could still be improved. A more open view of the sky is recommended. |
 | 10-20 | Fair |Represents a low confidence level. Positional measurements should be discarded or used only to indicate a very rough estimate of the current location. |
-| >20 |	Poor | At this level, measurements are inaccurate by as much as 300 meters with a 6-meter accurate device (50 DOP × 6 meters) and should be discarded. |
+| >20 |Poor | At this level, measurements are inaccurate by as much as 300 meters with a 6-meter accurate device (50 DOP × 6 meters) and should be discarded. |
+|  |  |