Differences

This shows you the differences between two versions of the page.

--- ezeio2:userinterface:configuration:devices:driverlist:discretein [2022-06-22 00:39] – johpar
+++ ezeio2:userinterface:configuration:devices:driverlist:discretein [2023-10-13 18:03] – [Status & Registers (right panel)] johpar
@@ Line 1: / Line 1: @@
 ==== Discrete Input driver ====
+==== Configuration settings (center panel) ====
 === Description ===
@@ Line 31: / Line 33: @@
 **REGISTER 1 & 2 modes** - Each discrete input is duplicated, providing the opportunity apply two modes of initial processing and two methods of scaling. The ezeio controller's microprocessor reads the onboard inputs at a rate of 1000 times per second and exports the results every 1/10 of a second (//connected I/O Expander inputs are sampled slower as they are transmitted via CANbus//). Additional processing is applied to logged registers (see [[ezeio2:userinterface:configuration:fields|"Fields"]])
-**Register 1 & 2 modes** - Choose one of the setting below for registers 1 & 2.
+**Register 1 & 2 modes** - These modes control how the analog to digital converter calculates the live values. //Separate settings on the individual "Field" settings control how each channel is logged//.  Choose one of the setting below for registers 1 & 2.
 | **Mode** | **Description** | **Effect** |
@@ Line 68: / Line 70: @@
 **Logic** - Set the true (or ON) state to be above or below the threshold value, with a value of 1 or 100. Choosing 100, make it easy to use the value to drive a digital output via "Fields".
- ==== Thermistor options ====
+ ==== Thermistor options (use Thermistor driver for more options and features) ====
 <WRAP center round tip 60%>
@@ Line 83: / Line 85: @@
 | TX1001 Pro | ThermoWorks | TX-1001X-OP |  |
 | ET7273 |  | ET7273 |  |
+----
+==== Status & Registers (right panel) ====
+----
+=== Device Status ===
+**Driver info** - Typically this is the name from the program file
+**Driver updated/version** - Date loaded or updated and the version of the driver
+**Battery & Signal** - Signal indicates the progress through the script. If driver fails to operate, signal number indicates progress
+**Driver status** - Color and text of status bubbles give a quick visual reference of Communication, Operation, and Application
+**Communication** - Com count indicates number of successful and unsuccessful data packets received
+----
+=== Available registers ===
+| 1 | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm |
+| 2 | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm |
+| 3 | Scaled value, Register 1 | Scaled by 2 point calibration |
+| 4 | Scaled value, Register 2 | Scaled by offset and factor |
+| 5 | Logical state | Analog value converted to digital (on/off) based on threshold setting |
+| 6 | Logical cycles | Number of times "Logical state" changes from off to on |
+| 7 | Logical active time | Number of seconds logical state is "on" (runtime) |