Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
| ezeio2:userinterface:configuration:devices:driverlist:discretein [2023-10-13 18:02] – johpar | ezeio2:userinterface:configuration:devices:driverlist:discretein [2023-10-13 18:03] (current) – [Status & Registers (right panel)] johpar | ||
|---|---|---|---|
| Line 108: | Line 108: | ||
| === Available registers === | === Available registers === | ||
| - | | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm | | + | | 1 | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm | |
| - | | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm | | + | | 2 | Raw electrical value | Unit type is set by "Input hardware type", V, mA, Ohm | |
| - | | Scaled value, Register 1 | Scaled by 2 point calibration | | + | | 3 | Scaled value, Register 1 | Scaled by 2 point calibration | |
| - | | Scaled value, Register 2 | Scaled by offset and factor | | + | | 4 | Scaled value, Register 2 | Scaled by offset and factor | |
| - | | Logical state | Analog value converted to digital (on/off) based on threshold setting | | + | | 5 | Logical state | Analog value converted to digital (on/off) based on threshold setting | |
| - | | Logical cycles | Number of times " | + | | 6 | Logical cycles | Number of times " |
| - | | Logical active time | Number of seconds logical state is " | + | | 7 | Logical active time | Number of seconds logical state is " |