ezeio2:ioexpander

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
ezeio2:ioexpander [2024-05-08 19:29] – ↷ Links adapted because of a move operation andrehezeio2:ioexpander [2025-06-13 16:26] (current) – [Connect via EXP port] andreh
Line 81: Line 81:
   * In the first 30 seconds of start-up, press the button (at the top of the I/O Expander) 3 times   * In the first 30 seconds of start-up, press the button (at the top of the I/O Expander) 3 times
   * The I/O Expander's LEDs will begin to roll red and green. Enter the desired address by clicking the button (5 clicks = address 5)   * The I/O Expander's LEDs will begin to roll red and green. Enter the desired address by clicking the button (5 clicks = address 5)
-  * The I/O Expender's LEDs will confirm the entry by flashing the address number (5 flashes = address 5)+  * The I/O Expander's LEDs will confirm the entry by flashing the address number (5 flashes = address 5)
  
 ---- ----
Line 128: Line 128:
   * In the first 30 seconds of start-up, press the button (at the top of the I/O Expander) 3 times   * In the first 30 seconds of start-up, press the button (at the top of the I/O Expander) 3 times
   * The I/O Expander's LEDs will begin to roll red and green. Enter the desired address by clicking the button (5 clicks = address 5)   * The I/O Expander's LEDs will begin to roll red and green. Enter the desired address by clicking the button (5 clicks = address 5)
-  * The I/O Expender's LEDs will confirm the entry by flashing the address number (5 flashes = address 5)+  * The I/O Expander's LEDs will confirm the entry by flashing the address number (5 flashes = address 5)
  
 ---- ----
  • ezeio2/ioexpander.1715196591.txt.gz
  • Last modified: 2024-05-08 19:29
  • by andreh