Differences

This shows you the differences between two versions of the page.

--- ezeio2:installation:start [2019-09-02 19:29] – andreh
+++ ezeio2:installation:start [2021-09-27 22:52] (current) – andreh
@@ Line 1: / Line 1: @@
-==== Installation ====
+===== Installing the ezeio =====
 {{indexmenu_n>500}}
-[[:ezeio2:start|Back to top]]
+The ezeio itself is very easy to install.
-{{indexmenu>.#1|msort}}
+Start by mounting the unit where you need it. Make sure it's in a dry location and not exposed to excessive dust or extreme temperatures.
+[[ezeio2:installation:mounting|More details on how to mount the hardware]]
+Before connecting sensors and devices, make sure the antenna is mounted on the antenna bracket, and placed in a location free from large metal items that could shield the signal.
+Then apply power using the power supply that came with the ezeio, and make sure the ezeio SERVER light goes green. This may take a few minutes that first time, but should not take longer than 5 minutes.
+[[ezeio2:installation:power|More details on the power requirements]]
+After confirming the SERVER light go green (meaning the ezeio communicated with the cloud servers), disconnect power and continue adding your sensors and devices.
+[[ezeio2:connections:inputs|Connecting to the ezeio inputs]]
+[[ezeio2:connections:outputs|Connecting to the ezeio outputs]]
+[[ezeio2:connections:modbusrtu|Modbus/RTU connections]]
+[[ezeio2:connections:modbustcp|Modbus/TCP connections]]
+[[ezeio2:connections:sdi12|SDI-12 connections]]
+[[ezeio2:connections:can|CANbus / J1939]]