Differences

This shows you the differences between two versions of the page.

--- ezeio2:installation:mounting [2022-03-01 17:35] – andreh
+++ ezeio2:installation:mounting [2025-08-18 16:09] (current) – andreh
@@ Line 29: / Line 29: @@
 **When using the ezeio with side-dock expansion modules, always use a DIN rail. Do not use screw mount with side-dock modules.**
 === Antenna ===
 <WRAP center round tip 60%>
-Proper antenna placement is __critical__ for reliable operation.
+**Proper antenna placement is __critical__ for reliable operation.**
   * ALWAYS keep the antenna connected
   * Keep the contacts dry and clean
-  * Do not damage the antenna cable
+  * Do not sharply bend or pinch the antenna cable
   * Never mount the antenna inside a metal enclosure
   * Mount the antenna away from metal objects and other cables
@@ Line 44: / Line 46: @@
 The antenna bracket can be mounted on a horizontal or vertical surface using two regular screws, or on a pole using a U-bracket. Make sure the bracket is mounted horizontally and the antenna pointing straight up.
-Keep the antenna away from metal objects and cables. Never mount the antenna inside a metal box.
+<WRAP center round important 60%>
+**Keep the antenna away from metal objects and cables.**
+</WRAP>
+<WRAP center round important 60%>
+**Never mount the antenna inside a metal box.**
+</WRAP>
 [{{:ezeio2:installation:antenna-bracket-mount.jpg?nolink&200|Antenna on bracket}}]