Differences

This shows you the differences between two versions of the page.

--- ezeio2:installation:mounting [2022-02-24 19:43] – andreh
+++ ezeio2:installation:mounting [2025-08-18 16:09] (current) – andreh
@@ Line 29: / Line 29: @@
 **When using the ezeio with side-dock expansion modules, always use a DIN rail. Do not use screw mount with side-dock modules.**
 === Antenna ===
-Use only the antenna supplied with the ezeio. The antenna and antenna mounting bracket has excellent performance when mounted correctly. Please follow these instructions.
+<WRAP center round tip 60%>
+**Proper antenna placement is __critical__ for reliable operation.**
+  * ALWAYS keep the antenna connected
+  * Keep the contacts dry and clean
+  * Do not sharply bend or pinch the antenna cable
+  * Never mount the antenna inside a metal enclosure
+  * Mount the antenna away from metal objects and other cables
+</WRAP>
+Use only the antenna supplied with the ezeio. The antenna and antenna mounting bracket has excellent performance when mounted correctly. Please follow these instructions carefully.
 The antenna bracket can be mounted on a horizontal or vertical surface using two regular screws, or on a pole using a U-bracket. Make sure the bracket is mounted horizontally and the antenna pointing straight up.
-Keep the antenna away from metal objects and cables. Never mount the antenna inside a metal box.
+<WRAP center round important 60%>
+**Keep the antenna away from metal objects and cables.**
+</WRAP>
+<WRAP center round important 60%>
+**Never mount the antenna inside a metal box.**
+</WRAP>
 [{{:ezeio2:installation:antenna-bracket-mount.jpg?nolink&200|Antenna on bracket}}]