This driver allows one ezeio access to the Fields of another ezeio/s over a local network. All 90 “Fields” are presented as “Available registers”. Both ezeio must be on the same IP subnet.

Name - The name is up to the user. Our suggestion is to choose a naming convention that makes the viewing the device list intuitive. Such as referring to the sensor, device or application. Keep the name short as it will be combined with the register name to create the default “Field” name (if added to “Fields”)

Active Check box - Check this box and “Save changes” to run the driver. The driver program can be suspended by unchecking the box and clicking on “Save changes”.

Notes - This space can be used to store information specific to the device, such as: location, wiring, scaling, etc.

IP address - Enter the last octet of the remote units IP address

• Fields from one ezeio can be added as “Fields”, and/or device registers, to another
• Writable “Fields” can be overwritten by the ezeio connected via the driver