==== GetAlarmInfo ====

Return the current information about the alarm

=== Description ===

<code>GetAlarmInfo( alarmno, mode )</code>

Fetch the given information about the current alarm state.

=== Parameters ===

| ''alarmno'' | The alarm number |
| ''mode'' | One of the modes below |

=== mode parameter, one of: ===

| ''AL_STATE'' | The alarm state (1=in alarm, 0=not in alarm) |
| ''AL_HOLDOFF'' | The remaining time on the holdoff timer (seconds x10, so 100 = 10s) |
| ''AL_ALARMHOLDOFF'' | The alarm holdoff setting (seconds x10, so 100 = 10s) |
| ''AL_RESTOREHOLDOFF'' | The restore holdoff setting (seconds x10, so 100 = 10s) |
| ''AL_ISALARM'' | Returns 1 if the alarm condition is true. Otherwise 0 |
| ''AL_ISRESTORE'' | Return 1 if the restore condition is true. Otherwise 0 |
| ''AL_RETRIGCOUNT'' | Number of times the alarm has be re-triggered |
| ''AL_RETRIGDELAY'' | Time remaining on the alarm retrigger delay (seconds x10, so 100 = 10s) |
| ''AL_RETRIGCOUNTSET'' | Retrigger count configured |
| ''AL_RETRIGDELAYSET'' | Retrigger delay configured (seconds x10, so 100 = 10s) |


=== Return value ===

Returns the requested information based on the mode parameter.

=== Example usage ===

<code javascript>
   new ds = GetAlarmInfo(10, AL_HOLDOFF);
   // ds is the number of 10th of seconds remaining on the holdoff   
</code>