==== syslog ====

Return data from the system log.

=== Description ===

<code>https://api.eze.io/v1/syslog/{serial}/from={datetime}/[to={datetime}]/[fields]/[interval[,aggregation]]/["raw"]</code>



=== Parameters ===

| ''serial'' | The serial number of the ezeio (XYZ987) |
| ''from=datetime'' | The beginning of the range. Format per RFC3339 or 1d/1h/1m |
| ''to=datetime'' | The end of the range. Format per RFC3339. If not given, current time is assumed.|
| ''fields'' (optional) | Comma separated list of fields. Possible fields are 1-90, GPSx, GPSy, GPSz, GPSsignal. If not given, all fields are returned. |
| ''interval'' (optional) | Sample interval. Given as a number followed by 'd', 'h' or 'm' for day, hour or minute. |
| ''aggregation'' (optional) | Method of aggregation. Only valid if interval is given. |
| ''"raw"'' (optional) | Only return values actually stored in database. |

The ''from'' parameter can be given as number of minutes/hours/days relative to current time. For example ''from=17h'' means "17 hours ago".

If no interval is given, an automatic interval will be calculated based on the size of the range. This is to ensure the amount of data returned is reasonable.

If range >= 365 days, interval will be 1 day.\\
If range >= 60 days, interval will be 6 hours.\\
If range >= 7 days, interval will be 1 hour.\\
For smaller ranges than 7 days, the interval will be 10 minutes.

Under no circumstances will the call return more than 5000 rows of data.

Aggregation modes: 

''mean'' : The mean (average) of samples in the interval\\
''mode'' : The mode (most common value)\\
''median'' : The middle value of sorted samples in the interval\\
''min'' : The smallest value\\
''max'' : The largest value\\
''sum'' : The sum of all samples in the interval\\
''spread'' : The difference between the highest and the lowest value in the interval\\
''count'' : The number of samples in the interval

=== Example usage ===

15 day interval using defaults:
<code>https://api.eze.io/v1/syslog/XYZ987/from=2017-03-01/to=2017-03-15</code>

Specifying fields:
<code>https://api.eze.io/v1/syslog/XYS987/from=2018-10-05T06:30:00Z/to=2018-10-06T06:30:00Z/fields=2,4,12,GPSx,GPSy</code>

Available fields are:

| ''#'' | Field # value, where # is an integer, 1-90 |
| ''ADC#'' | Raw ADC reading, where # is 0-10. 8=DC in, 9=Terminal DC, 10=5V terminal |
| ''out#'' | Raw output status, where # is 0, 1, 2 or 3 |
| ''fRunning'' | 1=Logic running. 0=Logic halted |
| ''ethComm'' | 1=Ethernet connection available. 0=No Ethernet connection |
| ''ethLink'' | 1=Ethernet link availabe. 0=No Ethernet link |
| ''GPSx'' | Location x-coordinate (latitude) |
| ''GPSy'' | Location y-coordinate (longitude) |
| ''GPSz'' | Location z-coordinate (elevation) |
| ''GPSsignal'' | GPS received signal |
| ''gpsLock'' | 1=GPS received has locked in signals from the satellites. 0=no lock |
| ''groupid'' | The group ID associated with this unit |
| ''uptime'' | Uptime in seconds |
| ''gsmComm'' | 1=Cellular data connection established. 0=No cellular data|
| ''gsmLink'' | 1=Cellular service found. 0=No cell service |
| ''gsmNet'' | 1=Cellular IP acquired. 0=No connection |
| ''cID'' | Cell tower ID |
| ''cLAC'' | Cell location area code |
| ''cMCC'' | Cell network MCC |
| ''cMNC'' | Cell network MNC |
| ''cRSSI'' | Cell received signal level |

Hourly max values:
<code>https://api.eze.io/v1/syslog/XYZ987/from=2019-02-01/to=2019-03-01/fields=1,2/interval=1h,max</code>

=== Return value ===

JSON formatted data 

//(below examples have whitespaces added for readability)//

<code javascript>

Example query:
https://api.eze.io/v1/syslog/baa157/from=2019-02-01/to=2019-03-01/fields=1,2

{
  "reqtime":"2019-06-16T22:51:49Z",
  "fieldmeta":[
    {
      "no":"1",
      "name":"Uptime",
      "tag":"",
      "decimals":"0",
      "unit":"s"
    },
    {
      "no":"2",
      "name":"Temperature",
      "tag":"temp",
      "decimals":"1",
      "unit":"°C"
    }
  ]
  "data":[
    {
      "time":"2019-02-01T00:00:00Z",
      "f1":null,
      "f2":null
    },
    {
      "time":"2019-02-01T00:10:00Z",
      "f1":432609,
      "f2":25.67
    },
    {
      "time":"2019-02-01T00:20:00Z",
      "f1":433209,
      "f2":25.709999
    },
    {
      "time":"2019-02-01T00:30:00Z",
      "f1":433809,
      "f2":25.709999
    },
    // ** Entries removed for brevity **
    {
      "time":"2019-02-28T22:00:00Z",
      "f1":786047.1666666666,
      "f2":25.016666666666666
    },
    {
      "time":"2019-02-28T23:00:00Z",
      "f1":789648,
      "f2":25.151667000000003
    }    
  ],
  "status":"OK",
  "exec_time":0.027250051498413086
}
</code>